BM12 Moisture Meter

Product number 3510205022
You save: 30 %
€12.95 €8.95 incl. VAT

show net price

Delivery status: Immediately available
BM12 Building Moisture Meter

With the very easy operable BM12 you measure wood and building moisture in seconds. The changeable puncture seal measurement pins ensure a solid connection to the bulk source and thus precise measurement results. With two choosable measuring modes you can set the BM12 either on wood moisture determination of timber and firewood or on building moisture determination on soft building materials like plaster, stucco or screed.

Besides the Material moisture this instrument determines the ambient temperature as well, which can be read off optionally in °C or °F.

The instrument also disposes about a long life battery duration through the automatic switch off. So it turns off after not using it for 2 minutes.

There is a callibration curve for wood moisture determination of common wood in Europe intergrated in this instrument, therefore no further adjustments are necessary for the determination of wood moisture content.

Benefits in practise:

  • Wood moisture and material moisture measurement instrument in one.
  • Ideal price-performance ratio
  • Protective cap
  • Ready for use right away
  • Temperature display choosable in °C or °F
  • Easy replaceable puncture seal measurement pins
  • Direct measurment value display in vol%
  • Mode selector switch
  • Battery status display


Technical data:

  • Measurement principle: resistance principle
  • Lengh of electrodes: approx. 8 mm
  • Electrodes: integrated, replaceable
  • Permissible environmental conditions: 0 to +50 °C / 0 to 85% RH.
  • Power supply 4x LR44
  • Dimensions (l x w x h): 96 x 40 x 20 mm
  • Weight: 83 g


Wood moisture
  • Measuring range: 6 to 44 %
  • Accuracy: approx. ± 2 %
  • Resolution: 1%


Building moisture
  • Measuring range: approx. 0,2 to 2,0 %
  • Accuracy: approx.. ± 0.2 %
  • Resolution: 0.1 %


Temperature
  • Measuring range: 0 to 50 °C
  • Accuracy: approx. ± 1 °C
  • Reslotion: 1 °C


Scope of delivery: Measurement instrument with protective cap, batteries, operating manual
Technical data
General information
  Article number 3.510.205.022
Wood moisture [%]
  Min. measuring range [%] 6
  Max. measuring range [%] 44
  Resolution [%] 1
  Approx. accuracy ± [%] 2
  Min. temperature compensation [%]
  Max. temperature compensation [%]
  Measuring principle Resistance measuring method
Material moisture [%]
  Min. measuring range [%] 0.2
  Max. measuring range [%] 2
  Resolution [%] 0.1
  Measuring principle Resistance measuring method
Material moisture [digits]
  Min. measuring range [Digit]
  Max. measuring range [Digit]
  Accuracy
  Resolution [Digit]
  Measuring principle
  Min. penetration depth (non-destructive) [mm]
  Max. penetration depth (non-destructive) [mm]
  Accuracy - Approx. temperature ± [°C] 1
Display
  LCD
  Monochrome
Device control
  Push buttons
  Thumbwheel
Housing design
  Plastic
  Electrode length [mm] 8
Power supply
  Internal (battery) 4 x 1.5 V, LR44
Surrounding conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 50
  Operation – min. relative humidity [% RH] 0
  Operation - max. relative humidity [% RH] 85
Dimensions
  Length (packaging excluded) [mm] 96
  Width (packaging excluded) [mm] 20
  Height (packaging excluded) [mm] 40
Weight
  (packaging excluded) [kg] 0.083
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Battery(-ies)
  Protective cap
  Electrode tips (2.2 x 8 mm)
  Operating manual
  Electrode tips (1.5 x 20 mm)
  2x union nuts
  Wood type directory
  Factory test certificate
Ascertainable measured values and functions
Internal sensors
  Ambient temperature [°C]
  Material moisture [%]
  Wood moisture [%]
  Material moisture [digits]
Functions and features
  Switching function °C/°F
  Material selection
  Backlit LCD monitor
  Automatic switch-off
  Battery status indication
  Maximum value display
  Minimum value display
  Hold function
  Acoustic alarm function
  Selection sensor characteristic map (sens)
  Unit 2
  Selection of wood material characteristics (Mat)
  Temperature compensation
  Manual temperature setting
  Automatic functional test
  Automatic battery test
  Display illumination
  Non-destructive measurement method
  Mode selection slide control
  Retaining clip

 standard equipment

 optionally available

 not available

 

Hotline:

+49 2452 962-450

Mon - Thu: 8:00am – 5:30pm

Friday: 8:00am - 5:00pm (CET)



E-Mail:

info@trotec24.com