TTK 72 E Dehumidifier + BX11 Energy Cost Meter

Product number KIT0002097
You save: € 174.93
€314.89 €139.96 incl. VAT

show net price

Delivery status: Immediately available
TTK 72 E Dehumidifier + BX11 energy meter
The humidity indication always in view

A special feature of the dehumidifier TTK 72 E is the LED display of current air humidity, which is installed in the front of the device. Depending on the colour of the LEDs, the humidity is either too low, accurate or too high.

  • Blue LED: the room air humidity is below 55 %
  • Green LED: the room air humidity is in the optimum range between 55 % and 70 %
  • Red LED: the room air humidity increases above 70 %

Other features of the TTK 72 E are among others the practical laundry drying function, timer function, a warning light when the water tank is full and overfill protection with auto shutdown.

With the dehumidification capacity of up to 24 liters a day, the dehumidifier TTK 72 E helps to dry the air in rooms up to 50 m². On the easy-care control panel including digital display you can choose from following dehumidification modes: automatic operation with a preset humidity level of 55%, hygrostat controlled operation with the target value selection between 30 und 80 % r.h. in 5% increments, the continuous mode and ventilation function.

Special features

  • Colour LED display of current humidity level
  • Indication of relative humidity level
  • Automatic operation
  • Drying clothes function
  • Timer function
  • 2 fan speeds
  • Hygrostat controlled operation with the target value selection between 30 und 80 % r.h. in 5% increments
  • Once the desired humidity level is reached, the compressor switches off automatically. The indicator stays on. The fan continues to run and if levels are exceeded the device is activated automatically.
  • Automatic defrost
  • Connection for the condensation drain

The BX11 energy meter reveals the energy gobblers in your home or office and shows you how you can save money and energy by cutting down on using certain gadgets or power-hungry devices or replacing old microwaves, washing machines or fridges which are draining the national grid and eating a sizeable hole in your pocket. See just how much juice your TV and other peripherals consume even in stand-by and save hard cash while acting environmentally responsibly.

Simply connect the meter between the socket and the household appliance in question and the energy cost meter shows you the exact power consumption

The BX11 energy meter may only be a small device but it can certainly change your way of thinking. It shows you - quite stunningly – just how much energy your thirsty electricity-powered devices and appliances are using and translates your energy consumption into either kilowatts or a monetary amount.

A few practical benefits:

  • Indication of Stand-by-consumption from 2 W
  • Indication of current power consumption of one or more devices
  • Indication of total energy consumption within given perios of time- simply program the electricity price, plug the BX11 in between a socket and the power consumer
  • Storage of two different electricity tariffs is possible (day and night tariff)
  • Thanks to multi outlet power strips it can be applied simulatously to number of devices
  • Precise daytime recording thanks to integrated digital clock with calendar function
  • Cost and consumption data every day
  • Power consumption indication as active power in watt or directly in incurred costs
  • Indication of voltage, amperage, and total recording time
  • Big LCD-Display
  • Protection in case of blackout
  • Nearly 10.000 hourly capacity of recording time
  • Price-performance ratio

Features and benefits of the BX11 energy meter:

  • Measuring range: 2 W – 3680 W
  • Operating conditions: +5 °C to +40 °C
  • Energy display: 0.1 – 999.9 kWh
  • Maximum performance: 3680 W /16 A
  • Recording capacity: 9999 hrs

Please note that this device is supplied with a 2 pin plug and without a suitable adapter
Technical data
General information
  Article number
Dehumidification performance
  At 30 °C / 80 % RH [l/24h] 20
  Max. [l/24h] 24
Amount of air
  Stage Max. [m³/h] 195
Recommended room size construction drying
Recommended room size dry keeping
Surrounding conditions
  Min. temperature range [°C] 5
  Max. temperature range [°C] 32
  Min. humidity range [% RH] 30
  Max. humidity range [% RH] 80
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Nominal current consumption [A] 1.48
  Power input [kW] 0.32
  Recommended fusing [A] 6
  Required current starting phase [A]
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.8
  Reciprocating piston compressor
  Rotary piston compressor
  Type of cooling agent R290
  Amount of cooling agent [g] 60
  GWP factor 3
  CO2 equivalent 0.00018 t
  Suction Side pressure [MPa] 1.2
  Discharge Side Pressure [MPa] 2.5
Water tank
  Contents in [l] 5.5
Sound values
  Distance 1 m [dB(A)] 48
  Length (packaging excluded) [mm] 185
  Width (packaging excluded) [mm] 330
  Height (packaging excluded) [mm] 550
  (packaging excluded) [kg] 14.5
  (packaging included) [kg] 15.5
Equipment, features and functions
Automatic defrosting
  Air circulation / electronic
  Hot gas
Automatic dehumidification
  Non-stop dehumidification
  Electronic hygrostat
  Analogue hygrostat
  stages 2
Condensate tank monitoring
  Container available
  Indicator container full
  Shut-off when full
Room air filter
  Readily accessible
  Ionizer selectable
Timer function
  Switch-on time preselectable
  Switch-off time preselectable
Functions and features
  Function for drying laundry
  Display of relative humidity
  Continuous operation
  LED display
  Memory function
  Automatic operation
  Selectable ionisation
  Internal drying function
  Child lock
  Noiseless night operation in whisper mode
  Comfort button
Operating hours counter
  Operating hours counter
  Power meter
  Plastic wheels
  Carry/transport handle(s)
  Rubber-tyred metal wheels
  Non-marking full-rubber wheels
  Swivel casters with parking brakes
  Adjustable bar handle
Condensate drain
  Hose connection possible
  Hose included in the scope of delivery
  Recommended hose size [mm] 10
Control panel
  Protective bar
  Digital display
Shelf life
Adjustable air discharge direction
  Swing function
Housing design
  Metal plastic composite housing
  Steel coated
  Stainless steel

 standard equipment

 optionally available

 not available

Technical data
General information
  Article number 3.510.205.920
Consumption measurement
  Min. measuring range [kWh] 0.1
  Max. measuring range [kWh] 999.9
Power [W]
  Min. measuring range [W] 2
  Max. measuring range [W] 3,680
AC voltage [V/AC]
  Min. measuring range [V] 230
  Max. measuring range [V] 230
Input voltage (consumer)
  Voltage [V, AC] 230
  Current frequency [Hz] 50 / 60
  Recording capacity [h] 9,999
Housing design
Measuring circuit category
  CAT II (2,500 V)
  CAT III 600 V
  CAT III (1,000 V)
  CAT IV (600 V)
  EN 61010-1
  Degree of pollution 2
Type of protection
Power supply
  Internal (battery)
  Via mains voltage
  External (USB)
  Via measuring voltage
Surrounding conditions
  Operation - min. temperature [°C] 5
  Operation - max. temperature [°C] 40
  Max. humidity range [% r.F.] 80
  Length (packaging excluded) [mm] 122
  Width (packaging excluded) [mm] 64
  Height (packaging excluded) [mm] 77
  (packaging excluded) [kg] 0.3
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Operating manual
  Transport bag
  One pair of measuring cables (banana)
  Contact temperature sensor type K
Ascertainable measured values and functions
Internal sensors
  Power [W]
  AC voltage [V/AC]
  DC voltage [V/DC]
  Resistance [Ω]
  Alternating current [A/AC]
  Direct current [A/DC]
  Capacity [F]
  Frequency [Hz]
  Duty cycle [%]
External sensors
  Temperature [°C]
Functions and features
  Integrated digital clock
  Consumption indication as active power in watts
  Consumption indication as scale of charges in cents
  Calendar function / date display
  2 programmable electricity tariffs
  Recording mode for long-term measurements
  Power fail-safe
  Continuity check
  Diode test
  Hold function
  Maximal value display
  Automatic measuring range selection
  Display illumination
  Automatic switch-off
  Contact temperature measurement with type K contact sensor
  Automatic battery test
  Duty cycle
  Acoustic continuity check
  Visual continuity check
  Polarity test
  Phase sequence indicator
  Unipolar phase testing
  Integrated torch
  Non-contact AC voltage detection (without galvanic contact)
  Visual alarm
  Acoustic alarm

 standard equipment

 optionally available

 not available



+49 2452 962-450

Mon - Thu: 8:00am – 5:30pm

Friday: 8:00am - 5:00pm (CET)