Navigation
- Machines
- Work tents
- Measuring instruments
- Work place safety
BG30 Gas detector
BG30 Gas detector
- Detail description
BG30 Gas detector
Quick and easy detection of gas leaks
This gas detector is an absolute must for use in the home, on camping sites, on boots or simply everywhere where flammable gases are stored or in use. It's always better to play it safe and check your camping gas capsules, liquid gas bottles or gas soldering irons regularly to see whether they are air-tight or not.
The BG30 gas detector is also an extremely versatile tool for commercial use to detect gas leaks in pipes and fittings.
An acoustic alarm sounds with increasing volume and frequency to signal the intensity and source of the leak. A headset can be worn to eliminate any interference from surrounding sources.
The lower explosion level (LEL) for the BG30 is only 10 % making it even more sensitive than the arithmetically designated alarm threshold as laid down in many norms and regulations. LEL stands for lower explosion level and defines the minimum gas concentration in the air in which an explosion can occur.
Benefits in practice:
-
Gas warning meter and gas detector-in-one meter
-
Optic and acoustic alarm
-
Alarm frequency and volume in relation to gas concentration
-
Individual calibration via infinitely adjustable sensitivity controls
-
Easy one-handed operation
-
Excellent value for money
-
Semi-flexible, 40 cm long swan neck probe for hard-to-reach or otherwise inaccessible places
The BG30 is able to reliably detect natural gas, methane, ethane, propane, butane, acetone, alcohol, ammoniac, petrol, LPG, engine fuel, hydrogen sulphide, industrial solvents, paint thinners and other combustible gases.
Technical data of the BG30 :
-
Accuracy : 50 ppm
-
Standard calibration : Methane
-
Alarm threshold / Alarm level max. : 10 % UEG / 40 % UEG
-
Warm-up time : approx. 60 seconds
-
Reaction time : < 2 seconds (up to 40 % LEL)
-
Functions : Optic and acoustic alarm (alarm frequency and volume in relation to gas concentration), individual calibration via infinitely variable intensity controls, headphone jack
-
Surrounding conditions of the operation : 0 to +50 °C, 10 to 90 % RH (non-condensing)
-
Surrounding conditions of the storage : -30 to +60 °C
-
Swan neck probe : Length approx. 40 cm
-
Battery lifespan : approx. 8 hrs
-
Weight : 520 g
-
Scope of supply : Meter, batteries, carry case, operating instructions
-
- Customers who have already bought this article also bought...
BS 15 sound level measuring equipment
net £ 16.61 gross £ 19.77 gross £ 24.72 incl.VAT plus delivery shipping costs calculator Order now – and save 20% with our introductory offer! Digital sound level measurement equipment from the MultiMeasure Basic series for checking noise limits and measuring environmental sound.
BA 15 flexible anemometer
net £ 40.84 gross £ 48.60 gross £ 60.75 incl.VAT plus delivery shipping costs calculator The easy-to-use, extremely flexible BA15 anemometer is equipped with a swan-neck sensor that can measure air velocity, air temperature and air flow rate both quickly and reliably. Because it is so flexible, the 15-inch (40cm) swan-neck sensor can be twi...
BX 10 energy cost meter
net £ 17.22 gross £ 20.49 incl.VAT plus delivery shipping costs calculator The BX10 is extremely efficient and reliable – and according to the German Material Testing Agency “TÜV” which awarded the BX10 its much coveted Blue Seal of Approval extremely safe to use too.
BE15 Voltage detector
net £ 6.01 gross £ 7.15 gross £ 8.19 incl.VAT plus delivery shipping costs calculator The BE15 is a contact-free voltage tester which allows the user to not only detect broken wires and leads in open cables, for example in cable drums or fairy lights, but also check all voltage carrying conductors like sockets, ...
- Ratings
My Account
Consulting
Tel. +49 (0) 2452 / 962-450
Fax. +49 (0) 2452 / 962 92-450
Mo. to Fr.: 8:00am – 6:00pm
E-mail: info@trotec24.com
